Up to 20 time servers can be configured. The use of multiple servers allows the clock maintenance service to select the best server, and provides back-up in case of server unavailability.
A list of available time servers can be found at file
Tolerance: Phase Correction:
The tolerance specifies the maximum amount of clock error in seconds . A tyical value is 0.1 second. Must be between 0.005 and 10.0 sec.
The phase correction allows small errors in the clock frequency to be corrected. The default value is zero. Values of +/- 10 are allowed.
Vendor: Signal Intelligence
Jump to the FaultWire page for Solutions and Fixes for this topic...