Partition Commander Now it's easy for anyone to safely partition their hard drive! You can reclaim waste disk space, organize files, even add new OSes.
Fix-It Utilities Make your PC run like new! Includes Anti-Virus, Anti-Spyware, hardware diagnostics, registry fixer, and more!
PC Mover Move applications, files and settings from one PC to another. Handles Windows upgrades too, even XP 32-bit to Windows 7 64-bit!
Hardware malfunction.
STOP: 0x00000080
Description
A hardware failure likely occurred, although it is hard to pinpoint what caused it.
Some older versions of Windows will show the description as "NMI_HARDWARE_FAILURE"
This is a fatal Windows error, typically called a Stop message, Bug Check, or more commonly the Blue Screen of Death (BSoD). The system is in a forced reboot state. Any unsaved work is likely lost.
Sample Screen
A problem has been detected and Windows has been shut down to prevent damage to your computer.
Hardware malfunction.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x00000080
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further
assistance.
Text may appear differently depending on where the error occurs.
Additional technical information (hex values) specific to a machine are not shown.
Confirm the hardware is working correctly using a hardware diagnostic program. If you suspect a specific hardware item, such as memory stick or video card, try replacing it with known good hardware.
Don't overlook the possibility that hardware was not installed correctly, especially anything you installed just prior to the problems starting. Make sure all cards and memory are securely seated in their slots. Verify disk drive cables are properly connected and are not loose.
Several software products that offer an extensive range of hardware diagnostics includes Fix-It Utilities Professional and SystemSuite Professional. Other diagnostic products include Eurosoft's PC Check and Iolo's System Mechanic.
If you just installed new hardware, confirm it is really compatible with the Windows. Use the Hardware tab on the compatibility page for Windows 7 or Vista. The XP compatibility page was removed from the Microsoft site in Nov-2010.
FaultWire Staff Posted: 5-Oct-2008
Check Memory
8
You may have a defective memory. This is even more likely if it only occurs when the system is cold or hot, but not all the time. Use a memory tester to confirm if it is defective or if you have spare memory, try replacement.
Windows 7 and Vista include a Memory Test program when booting from the Windows Installation DVD. Step-by-step instructions with screen shots are available at Using System Restore on 7/Vista/2008 as part of System Recovery.
Several software products that also provide memory and video diagnostics includes Fix-It Utilities Professional and SystemSuite Professional. Other diagnostic products include Eurosoft's PC Check and Iolo's System Mechanic.
Additional Memory Solutions:
Confirm all the memory is of the same type and speed. Many motherboards only work correctly when the memory is installed with matched sets and matched speeds.
If you added or changed your memory just before this problem occurred, try reverting to the prior memory configuration to confirm it's the source of the problem.
Check that the memory is fully seated in the sockets. Memory sockets often have side latches that need to be upright to indicate the memory is correctly locked in place.
Confirm the memory resides in the correct slots on the motherboard. You'll need to refer to the motherboard manual to confirm this. There is little consistency, even within a single vendor. Some systems require that memory is installed as matched pairs, but not always adjacent to each other!
It's also possible the memory problem is on the video card, as they often contain additional memory. The video card should be tested and/or try a different video card to see if the problem goes away.
FaultWire Staff Posted: 5-Oct-2008
Get the Latest Drivers
6
Check if you are using the latest hardware drivers, especially the chipset and video drivers. Older drivers are a common contributor to BSoD issues.
You can use a product like Driver Genius or Radar Sync to verify you have the latest drivers and help keep all your drivers up-to-date. If you're comfortable with driver installations, you can individually find and install current drivers.
While BSoD fatal stop errors are identified by Microsoft Windows, they are often caused by
non-Microsoft applications, drivers and hardware issues.
Research this Issue
Getting search results...
Notes
While we believe this information up to date and accurate, FAQware is not responsible for any inaccuracies. If you find something that is out of date or inaccurate, please let us know at
so we can correct it.
