spacer spacer spacer
  arrow Description
  arrow Sample Screen
  arrow Key Facts
  arrow Solutions
  arrow Forum Help
  arrow Vendor Summary
  arrow Research this Issue
  help Solutions Help
  Fix-It Utilities
Make your PC run like new! Includes Anti-Virus, Anti-Spyware, hardware diagnostics, registry fixer, and more!
PC Mover
Move applications, files and settings from one PC to another. Handles Windows upgrades too, even XP 32-bit to Windows 7 64-bit!
  Partition Commander
Now it's easy for anyone to safely partition their hard drive! You can reclaim waste disk space, organize files, even add new OSes.
Fatal Error Solutions

Invalid combination of parameters was...

STOP: 0x00000131


There was a problem with the values sent to initiate the save or restoration of the extended processor state. The extended processor state includes legacy floating point and SSE (Streaming SIMD Extensions) data, typically used along with other data to save the state of the system for hibernation or in virtualization situations.

This is a fatal Windows error, typically called a Stop message, Bug Check, or more commonly the Blue Screen of Death (BSoD). The system is in a forced reboot state. Any unsaved work is likely lost.

  Sample Screen  

A problem has been detected and Windows has been shut down to prevent damage to your computer.

Invalid combination of parameters was detected while saving or restoring extended processor state.

Technical Information:

*** STOP: 0x00000131

Beginning dump of physical memory
Physical memory dump complete.

Contact your system administrator or technical support group for further

Text may appear differently depending on where the error occurs.
Additional technical information (hex values) specific to a machine are not shown.
  Key Facts  
Full Title
  Invalid combination of parameters was detected while saving or restoring extended processor state. 

Stop Code


occurance meter
  7, 8

  Microsoft Corporation
  Solutions and Fixes  
  Date votes Ratings
Reboot the System
    Add    Flag
solution icon
A reboot of the system should clear the problem. If the system was in a Hibernation state, the hibernation copy may be lost along with any unsaved work.
solves it indicator
risk indicator
effort indicator
  FaultWire Staff
Posted: 3-Sep-2009
Check Memory
    Add    Flag
solution icon

You may have a defective memory. This is even more likely if it only occurs when the system is cold or hot, but not all the time. Use a memory tester to confirm if it is defective or if you have spare memory, try replacement.

Windows 7 and Vista include a Memory Test program when booting from the Windows Installation DVD. Step-by-step instructions with screen shots are available at Using System Restore on 7/Vista/2008 as part of System Recovery.

Several software products that also provide memory and video diagnostics includes Fix-It Utilities Professional and SystemSuite Professional. Other diagnostic products include Eurosoft's PC Check and Iolo's System Mechanic.

Additional Memory Solutions:

  • Confirm all the memory is of the same type and speed. Many motherboards only work correctly when the memory is installed with matched sets and matched speeds.
  • If you added or changed your memory just before this problem occurred, try reverting to the prior memory configuration to confirm it's the source of the problem.
  • Check that the memory is fully seated in the sockets. Memory sockets often have side latches that need to be upright to indicate the memory is correctly locked in place.
  • Confirm the memory resides in the correct slots on the motherboard. You'll need to refer to the motherboard manual to confirm this. There is little consistency, even within a single vendor. Some systems require that memory is installed as matched pairs, but not always adjacent to each other!
  • It's also possible the memory problem is on the video card, as they often contain additional memory. The video card should be tested and/or try a different video card to see if the problem goes away.
solves it indicator
risk indicator
effort indicator
  FaultWire Staff
Posted: 5-Oct-2008
Replace the Processor
    Add    Flag
solution icon

The processor (CPU) may be defective and needs to be replaced. Before taking this step, check if any of these more common issues are occurring that will cause the processor to fail:

  • Confirm both the CPU and system fans are working properly
  • The CPU is properly seated in it's socket and the clamps are in place
  • There is sufficient thermal compound between the CPU and the CPU heatsink
  • The CPU is not being overclocked (via BIOS motherboard settings

If you do replace the CPU with a different model (higher speed or more cores) confirm the power (watts) is the same or lower than the current CPU, or ensure you add additional cooling for the hotter part.

solves it indicator
risk indicator
effort indicator
  FaultWire Staff
Posted: 19-Jan-2009

Also see our list of common Fatal Error Solutions.

  Forum Help  
Forums on topic

Check out what others say about this issue and review or add your own comments and solutions!

Go to Forums on topic.
  Vendor Summary  
  Microsoft Corporation (more info...)

Microsoft Corporation Logo



    While BSoD fatal stop errors are identified by Microsoft Windows, they are often caused by non-Microsoft applications, drivers and hardware issues.  
  Research this Issue  
Getting search results...
  While we believe this information up to date and accurate, FAQware is not responsible for any inaccuracies. If you find something that is out of date or inaccurate, please let us know at so we can correct it.